PORSCHE CAYENNE TURBO EHS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Take your 991.1 or 991.2 turbo or turbo s to a new level with these muffler bypass pipes. They produce the wildest sound available on the market today and are a perfect upgrade for level 3 or 4 car used on the track. They produce loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. Features: - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni1...(choose a part on the right to read more)
Are you one of those that are looking for more sound from your Porsche sport exhaust (pse)? Perhaps it's not quite as aggressive as you would like, or your last Porsche just sounded so much better? Don't worry, we have you covered, and the beauty is, you don't have to touch the catalytic converters which is a big no, no with Porsche dealers. With the valves open you receive a far more exotic, rich, deep, turbo motorsport tone and with the valves closed, soft subtle, completely stock sounds. So, absolutely no compromise and you will be thinking, the car really should have left the factory like this! Features: - + 10 crank hp & + 8 crank torque. - weighs 29 lbs. (13 kg) - German v2a - x5crni18-10 - 1.4301 stai...(choose a part on the right to read more)
$4,312.00
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
Product details:
High performance intercooler upgrade engineered for optimum flow efficiency lowers intake temperature and improves flow for maximum power gains
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-available for factory OEM turbo or upgraded k27 turbos
-increases horsepower and torque by 40 whp and 29 ft-lbs
-flow as much as 900 cfm @ 2.6/1 pr ratio with less than 1 psi drop
-cubic inch mass increase from 258 (oem) to 650
-c2 turbo long-neck style with no o-rings for a leak proof charge.
-intercooler kit includes bypass valve, bypass sleeve, rubber elbow, 5-ply silicone hoses, and all mounting ha...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1984-86 911 1978-83 930 1975-77
$2,395.00
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
Ksport procomp front big brake kit 15 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temper...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,104.00
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,980.80
Make a selection
Ksport procomp front big brake kit 14 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,693.25
Make a selection
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owner's dream. B&b's complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive. Their exhaust kit consists of hand built t321 stainless steel headers, with or without, heat exchangers and a t304 stainless steel high performance muffler. Also included is a turbo oil accumulator, oil scavenging line and all necessary hardware, gaskets and accessories to make for a clean bolt-on installation. Billy boat performance exhaust has a deep commitment to build ...(choose a part on the right to read more)
General Fitment 930 1975-77
$4,695.57
Make a selection
Billy boat's newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4 and Porsche 3.6l turbo. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development o...(choose a part on the right to read more)
General Fitment 911 1989-94
$5,294.94
Make a selection
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owner's dream. B&b's complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive. Their exhaust kit consists of hand built t321 stainless steel headers, with or without, heat exchangers and a t304 stainless steel high performance muffler. Also included is a turbo oil accumulator, oil scavenging line and all necessary hardware, gaskets and accessories to make for a clean bolt-on installation. Billy boat performance exhaust has a deep commitment to build ...(choose a part on the right to read more)
General Fitment 930 1975-77
$5,086.41
Make a selection
Gruppem carbon aerodynamic front lip Porsche 997 turbo 06-09
The gruppem front lip is an excellent way to improve the 997;s form and function. Front lips serve two purposes; first, they increase down force on the front end of the car increasing traction and stability at high speeds. This increased pressure on the front tires gives the driver more control over the vehicle. Front lips are also used to customize the exterior of a car. They give a more aggressive, race inspired look to the 997 in a subtle and classy manner. The gruppem front lip takes it to the next level with its carbon fiber construction. Not only does this save weight compared to other materials, but it also features carbon fibers unique w...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$2,471.03
Make a selection
Their newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4 and Porsche 3.6l turbo. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every ...(choose a part on the right to read more)
General Fitment 911 1989-94
$3,375.28
Make a selection
Product details:
Direct upgrade/replacement for OEM ldz turbo resulting in significant power gains and quicker spool. Includes all gaskets and bracket needed for installation.
Features: turbocharger, gaskets, and bracket
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-peak power on a completely stock 1986 911 turbo is 251 hp and 280 ft/lbs of torque
-peak power on a k27/1 bar-equipped 1986 911 turbo improves to 315 hp and 358 ft/lbs of torque (with over 300 ft-lbs of torque available at 3800 rpm)
-turbo intake size: 2.75”
-turbo inlet size: 2.75”
-twin-scroll turbine housing for quicker response than a single exhaus...(choose a part on the right to read more)
General Fitment 930 1975-77
$2,481.50
Make a selection
As you step up the power level on your 997 turbo, having proper cooling efficiency is mandatory to maximize your turbo performance. Street and track cars will heavily benefit from the use of our upgraded intercoolers. The factory Porsche intercooler core is great, but their end tanks are what is lacking. Agency power has developed these complete intercooler replacements for your Porsche 997 turbo. Some modifications are required to the intercooler frame and vehicle for fitment.
The bar and plate intercooler core is designed to provide maximum cooling efficiency for turbo cars producing up to 950 horsepower. The cast end tanks are aluminum and then precision welded to the thick racing upgraded cores. The ends...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,749.95
Make a selection
Product details:
Great sports car sound with increased power and significant reduction in turbo lag
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-adds 15 whp for improved throttle response
-improved sports car sound with a much deeper, more aggressive exhaust note
-constructed with 3.0" 14-16 gauge t304l c.n.c. Mandrel bent stainless steel tubing for maximum performance and durability
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing.
-available in single or dual outlet configuration
...(choose a part on the right to read more)
General Fitment 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $1,395.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Product details:
Replaces and bypasses factory re-circulation system, funneling air directly into the intercooler for increased performance and significant weight savings
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-eliminates faulty o-ring assembly
-compatible with OEM intercooler, fabspeed’s long-neck performance intercooler, and most others
-includes all required hose clamps
-simple diy installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 930 1975-77 911 1978-83 911 1984-86 911 1987-89
Product details:
Huge reduction in turbo lag for maximum possible power and sports car sound; based off of the Porsche factory 934 imsa race car design
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-increases horsepower and torque by 46 whp and 65 ft-lbs
-constructed with 3.0" tubing for maximum flow
-integrated angle-cut outlet
-simple diy installation in less than 1 hour
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1978-83 911 1984-86 911 1987-89 911 1989-94
Product details:
Bolt-on turbo-back exhaust system providing great sports car sound and improved exhaust flow
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-increased horsepower and torque throughout the rpm range
-dramatic increase in sports car sound with a deeper, throatier tone.
-includes fabspeed’s deluxe outlet tips; polished angle-cut ovals
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-d...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,395.00
Make a selection
Product details:
The ultimate lightweight aluminum strut bar reproduced exactly as used by the Porsche motorsport ag on the 800 hp 993 tt GT2 evo
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-stiffens front suspension for improved handling and turn-in
-direct bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1989-94
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|